Automation Technology

A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Sei...

A programmable Schleuniger stripping machine for coaxial cables is available. Cable diameter step resolution: 0.01mm, max. stripping length: 30mm, max. cable diameter: 7mm, throughput: approx. 350-600/h, cable lists: 100, cable programs: 1000, machin...

A barely used allround PCB handling station RG Elektro-Technologie for loading purposes is available. Application possibility: before AOI/after AOI/combined, PCB transport height range: 930mm-970mm, min. PCB dimensions X/Y: 80mm/50mm, max. magazine d...

Four identical component storage towers Royonic Mycronic are available. Software: STSys SMDSoftware, version: 2.2.2.0, tower firmware: 78, capacity (7 inch reels): approx. 1000, light tower: yes, terminal light: no, external display: no, 2D internal ...

A condensation soldering system Rehm is available. Process medium: Galden/perfluoropolyether, process chamber sealing: hermetic, profile control: injection principle, max. process temperature: approx. 240°C, filter: Galden filter, machine dimensions ...

An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-...

A custom-built wide brush ferrule mounting stapling machine for mounting the brush ferrule onto the handle and for mechanical fixation by staples is available. Stapling units top/bottom: 1/1, brush widths: 25mm/50mm/75mm/100mm, additional brush sizes...

An automation machine Infinite Technologies and Robotics (CN) for automated assembly of clips on electroplated chrome trim strips is available. Clips per component: 6, component geometries: 4, pressing force: 100N, pressing force tolerance: +/-10N, p...

A stencil screen printing machine Ekra is available. Frame dimensions X/Y: 800mm/570mm, print dimensions X/Y: 500mm/390mm, print speed: 110mm/s, positioning accuracy: +/-0.02mm, squeegee pressure: 320N, table adjustment X/Y: +/-8mm, max. print materi...

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possi...

An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment ca...

Some Siemens and Vacon automation components are available. 1) Frequency inverter Vacon NXS00225. 2) Power module Siemens Simodrive 611 50A. 3) 2x power module Siemens Simodrive 611 25A. 4) 5x infeed module Siemens Simodrive 611 10kW/25kW. 5) 3x infe...

A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions...

A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible.

Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.

Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm...

A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inl...

A Meyer color sorting system for the optical separation of small grain sizes in the food industry is available. Chutes: 10, cameras: 20, camera type: RGB 5400 CCD, compressor power: 37kW, compressor delivery rate: 7.1m³/min. Including integrated stai...

Two identical DEK stencil printers are available. Printing speed: 150mm/s, max. printing dimensions X/Y: 510mm/489mm, max. stencil dimensions X/Y: 510mm/508mm, min. stencil dimensions X/Y: 71mm/38mm, max. product thickness: 6mm. Machine dimensions X/...

A soldering system SMT with pin chain conveyor for the printed circuit board industry is available. Temperature: 300°C, heating time: approx. 30min, convection zone: 1660mm, cooling zone: 1030mm, process length: 2780mm, usable width range: 10mm-460mm...

A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume fl...

A CNC contour processing system HML for precise edge processing and contour milling of technical laminates or printed circuit boards (PCBs) is available. Weight: approx. 1400kg. Documentation available. An on-site inspection is possible.

Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB l...

An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is poss...