Energy Management

A Kaeser compressed air system is offered. 1) Kaeser SM13 rotary screw compressor, year of manufacture: 2022, power: 7.5kW, max. working pressure: 11bar, controller: Kaeser Sigma Control 2, operating hours: 1328h, load hours: 426h. 2) Kaeser Secotec ...

An oil-lubricated screw compressor AiRKO is offered. Motor power: 7.5kW, Motor speed: 3000rpm, Volume flow: 1.02m³/min, Max. operating pressure: 10bar. Viewing possible by prior arrangement.

Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg,...

Various motors, some as-new and unused, SEW-Eurodrive and NORD Drivesystems, are available. As-new: 1) SEW-Eurodrive FA77/G DRN100LS4/TF, year of manufacture: 2021, power: 2.2kW. 2) SEW-Eurodrive SA67/T DRN90L4, year of manufacture: 2025, power: 1.5k...

A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant d...

Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann ...

Operating pressure: 10bar, test pressure (PT): 15bar, steam temperature (TS): 184°C, water content: 916l, steam output: 5480kg/h, heating surface (HS): 73.4m², heat output: 3437kW, maximum burner capacity: 3772kW, minimum burner capacity: 1320kW, gas...

Throughput capacity: 600kg/h, permissible operating pressure: 16bar, fuel: oil, length: 1600mm, width: 1000mm, height: 1900mm. Inspection on site is possible. The machine is not under power.

A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heati...

A Weier generator is available. Power: 1650kW, Voltage: 690V, Speed: 1575rpm, Design: B3, Current: 1517A, Power factor: 0.91, Insulation class: H, Lubricant quantity: 88cm³, Lubrication interval: 3600h, Weight: approx. 5900kg. The generator originate...

A compact FIC/Rivacold chiller is available. Usable volume: 410l, cooling capacity: 33.7kW, compressor: S15-52Y, compressor power: 15HP, tank load capacity: 725kg, refrigerant: R404A, cooling tower water consumption: 9.3m³/h, cooling unit water consu...

A total of six Franz Wölfer three-phase asynchronous motors for converter operation are available. 1) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, ...

Refrigerant: R407C, refrigerant charge: 28kg, max. operating pressure high pressure side: 25bar, oil fill quantity: 5.5l, cooling medium: water, volume: 6l, max. operating temperature cooling medium: 35°C, sound pressure level: 74dB(A), ambient tempe...

An electric steam generator is offered. Steam output: 21kg/h, permissible operating overpressure: 6bar, capacity: 8.2l, heating capacity: 16kW. Equipped with analog pressure gauge, function and fault indicator, filling switch. Inspection possible by ...

A complete steam boiler system with a feedwater module and various spare parts is available. 1) Loos steam boiler, year of manufacture: 1974, steam output: 4000kg/h, max. operating pressure: 16bar, max. operating overpressure: 20bar, max. steam tempe...

Two identical Loos steam boiler systems with Weishaupt burners are available. 1) 2x Loos International U-HD 1250 steam boilers, year of manufacture: 2003, max. operating pressure: 10bar, steam output: 1100kg/h, total volume: 1365l. 2) 2x Weishaupt G7...

A pure steam generator from the manufacturer Apparatebau Wärmetechnik GmbH, which was distributed by Spirax Sarco, is for sale with a condensate collector. Heat output: 446kW, max. operating pressure in the tubes/around the tubes: 13bar/6bar, operati...

Installed power: 18.1kW, voltage: 400V, phases: 3, frequency: 50Hz, max. current consumption: 30.8A, protection rating: IP54, permissible water operating pressure: 6bar, max. water temperature: 65°C, refrigerant: R404A, refrigerant charge: 8.8kg, max...

Standard: IEC 34-1, rated power: 114.7kW, rated speed: 1,885rpm, duty type: S1 (continuous duty), insulation class: H-RISE F, armature voltage (Arm.): 460V, armature current (Arm.): 271A, excitation voltage (Exc.): 340V, excitation current (Exc.): 5....

A compressor is offered. Drive power: 18.5kW, Delivery rate: 2910ltr/min, Max. operating pressure: 8bar. Dimensions X/Y/Z: approx. 1287mm/799mm/1296mm, Weight: approx. 540kg. Inspection possible by appointment.

A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fu...

An air-cooled Lennox chiller is available. Cooling capacity: 312kW, power consumption: 96kW, refrigerant: R407C, refrigerant circuits: 2, filling quantity: 2×38kg, compressors: 4, evaporator: plate heat exchanger, water flow rate: 41.2m³/h, pressure ...

A complete Reisner refrigeration system including water tank, dry cooler and condenser is available. Version: split version, refrigerant: R513A, tank volume: approx. 3m³, cooling capacity: 170kW, medium: water, medium temperature inlet/outlet: 14°C/1...

A monoblock high-performance dual-fuel burner Elco is available. Nominal output range (gas): 820kW-7340kW, nominal output range (oil): 1470kW-7340kW, gas connection pressure range: 70mbar-500mbar, fan power: 15kW, burner tube outer diameter: 415mm, m...