Measurement And Testing

A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resol...

A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical...

An optical 3D coordinate measuring machine Keyence is available. Measurement accuracy: +/-10µm, repeatability: +/-2µm, measurement points: 9 million, max. measurement diameter: 300mm, max. measurement height: 200mm, max. measurement dimensions (multi...

A Mitutoyo CNC bridge coordinate measuring machine is available. Travel X/Y/Z: 1200mm/2000mm/1000mm, measuring volume: 2.4m³, max. workpiece weight: 2500kg, max. workpiece height: 1000mm, probe system: Renishaw, probe positions: 20, measuring accurac...

Measuring and evaluation electronics: Rotor Test 505, balancing planes: 1/2, max. rotor weight: 300kg, max. rotor length: 4000mm, max. rotor diameter: 1400mm. Documentation available. An on-site inspection is possible.

X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) ...

A high-precision Fluke temperature calibration bath for generating a stable and homogeneous reference temperature is available. Temperature min./max.: -20°C/150°C, temperature resolution: 0.01°C, stabilization time: approx. 20min, bath volume: 9.2l, ...

X-axis: 700mm, Y-axis: 600mm, Z-axis: 450mm, measuring system: linear encoder, resolution: 0.001mm, max. workpiece weight: 500kg, max. workpiece dimensions: 500x500x500mm, compressed air connection: 5bar, mains connection: 220V/50Hz, weight: 1.15t, s...

Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joy...

An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstrea...

A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit includ...

Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possi...

Table height: 850mm, probing error MPEp: 3.5μm, length measurement error MPEe: 3.0+L/250μm, machine height: 1845mm, electrical connection: four grounded Schuko sockets 220V with 16A protection, power consumption: max. 700VA, spatial temperature gradi...

Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

An optical CNC 3D coordinate measuring machine Keyence is available. Display resolution: 0.1µm, repeatability: 2µm, measurement accuracy: +/-10µm, low magnification: 300mm/200mm, high magnification: 70mm/50mm, max. load capacity: 20kg, weight: approx...

Various old but fully functional measuring and testing devices from a grain laboratory are available. 1) Falling number tester Perten Falling Number 1402. 2) Sample cleaner A/S Rationel Kornservice Sample Cleaner MLN, weight: approx. 60kg. 3) Laborat...

A traversing and modular measuring, logging and control system Mahlo for material quality control is available. Number of sensors: 6/frame, product materials: films/nonwovens/paper etc., thickness measurement with laser: sensor: Calipro DML-D, measur...

X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (m...

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate pla...

An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/...

An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software,...

A test station for steering wheel testing is available. Workpiece: steering wheels, operating pressure: 6bar, test processes: ALDW/heating mat resistance/horn contact force measurement/horn contact travel measurement. Machine dimensions X/Y/Z: approx...

A Köhler salt spray chamber for corrosion testing of materials and components is available. Test chamber volume: 1000l, temperature constancy: +/-1K, water pressure range: 2.5bar-5bar, internal dimensions X/Y/Z: 1250mm/950mm/760mm, machine dimensions...

Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y...