Process Equipment And Chemical Plants

A heated Herbst stainless steel agitator is offered. Vessel volume: approx. 15l, vessel design: double-walled, vessel material: stainless steel, agitation system: vertical process agitator, speed control: continuously variable, maximum temperature: 1...

A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, construction: stainless steel, nominal capacity: 4000l/h, membrane modules: 24, membrane area: 12.5m²/m...

A customized industrial Sartorius crossflow membrane filtration system is available. Filtration process: tangential flow filtration, design: skid, contact points: steel, membrane housings: 5, filter housing volume: 17, max. operating temperature: 95°...

Two identical VAG diaphragm check valves are available. Nominal size: DN350, pressure rating: PN10, max. operating pressure: 10bar, max. operating temperature: 50°C, medium: water (1st stage filtrate), face-to-face length: 800mm, flange outside diame...

Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 130...

An oil-injected stationary compressor CompAir is available. Stages: 2, Air flow rate: 17m³/min, Max. operating pressure: 12bar, Machine dimensions X/Y/Z: approx. 3300mm/1800mm/2000mm, Weight: approx. 3900kg. Documentation available. An on-site inspec...

Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, accelera...

A Mark compressor unit including a Kaeser compressed air receiver is available. 1) Mark RMA 11 IVR compressor, year of manufacture: 2023, operating pressure: 7bar, max. pressure: 13bar, max. temperature: 43°C, power: 3kW, weight: approx. 250kg. 2) Ka...

A stationary Rippert filter and dust extraction system is available. Filter sections: 4, Filter elements: filter bags, Filter bag dimensions 1 X/Y: 6603mm/1775mm, Filter bag dimensions 2 X/Y: 6603mm/1200mm, Filter area 1/2: 45m²/60m², Regeneration dr...

A mobile Höcker dust extraction and filtration unit is available. Inlet diameter: 140mm/160mm, max. airflow: 1950m³/h, max. vacuum: 2600Pa, filter category: H3, machine dimensions X/Y/Z: approx. 1450mm/1050mm/2000mm, weight: approx. 350kg. Documentat...

Two Artinox inclined clarifier/lamella clarifier systems made of stainless steel are offered for the continuous mechanical separation of dirt particles, sludge, or sediments from water or process liquids. 1) Artinox inclined clarifier/lamella clarifi...

Offered is a Ruma cleaning centrifuge system with cooling unit and pump system for cleaning cooling lubricants, grinding oils, emulsions, wash water and process fluids. Max. achievable cleanliness level: approx. 1µm, suitable media: oils, emulsions, ...

Two old compressors are available. 1) Oil-lubricated screw compressor Ingersoll Rand SSR MH 22, year of manufacture: 2001, max. operating pressure: 10bar, power: 25.5kW, weight: approx. 500kg. 2) Oil-lubricated piston compressor Blitz D2N 1500 A/U, y...

A total of five mobile antiviral air purifiers Mann & Hummel are available. Air change rate at 70m²: 5-fold, max. indoor room size: 70m², max. air volume flow: 950m³/h, prefilter: ISO ePM10, main filter: HEPA H14, min. separation efficiency: 99.995%....

A Mahle compressed air compressor including a refrigerated dryer is available. Flow rate: approx. 96m³/h, max. operating pressure: 10bar, machine dimensions X/Y/Z: approx. 1500mm/800mm/800mm, weight: approx. 350kg, operating hours: approx. 3838h. An ...

Motor power: 15kW, AC, max. air flow rate: 21,000m³/h, max. vacuum pressure: 1900Pa, dust container capacity: 200l, disposal drum Hobbock discharge: 2x35l, weight: 1590kg, colour: RAL5012 front / RAL9006, first filtration stage main filter, cartridge...

Tank capacity: 5l, melting capacity: 5kg/h, adhesive type: granules and blocks (thermoplastic), operating temperature: 20-200°C, heating-up time (160°C): approx. 30min, adhesive viscosity: 100-20,000mPas, heated hose connections: 1 to 4, filling: man...

A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco,...

A filter system from brewery operations is available. Plate dimensions X/Y: 1000mm/1000mm, filter area: 1m²/plate, number of layers: 86, throughput capacity: 150hl/h, operating pressure: 8bar. The hydraulics were overhauled in 2019. An on-site inspec...

An industrial vacuum dust collector Höcker is available. Suction diameter: 250mm, nominal volume flow: 4241m³/h, min. volume flow: 3534m³/h, motor power: 5.5kW, vacuum pressure: 2940Pa, weight: approx. 630kg. Documentation available. An on-site inspe...

A vibration and hose filter system Vaupel is available. Air volume flow: 3200m³/h, motor power: 3kW, speed: 2300rpm, filter area: 9m². An on-site inspection is possible.

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamb...

A complete compressor system is available. 1) Screw compressor German Blast 22, year of manufacture: 2011, motor power: 22kW, operating pressure: 10bar, air flow rate: 190m³/h, machine dimensions X/Y/Z: approx. 1100mm/750mm/1450mm, weight: approx. 50...

A complete double agitator system 2 x 3000l made of high-quality V2A including propeller agitators made of V2A, continuously variable speed-controlled. Inspection by appointment possible.